Questions & Answers for: U-Line ejector

Ad

Question about Refrigerator Ice Maker

1 Answer

...the lines are not plugged . Also the inlet screen on the Valve is clean from the supply line. The ejector blades are in the upward position which I think is the correct spot when water is needed. I ...

Ad

...maker and now we can't get it to make ice again. If the compressor or fan isnt running. Check your ejector blade in your icemaker.It should be at 12 oclock. If it isnt then remove the cover of the ...

Ad

Question about Refrigerator Ice Maker

2 Answers

...When it doesn't function, you get the stated problem. First thing you need to check is the ejector blades, They should be pointing straight up at 12 oclock. If not you will need to advance ...

does the ice maker have its own seperate breaker ? No seperate breaker. You do need to look at the ejector blade. That needs to be a 12 oclock. Straight up before the hold switch can release and then

Question about Icemaker

1 Answer

...hot now not cold If this is a stand alone icemaker. Is the unit running? If not check the icemaker ejector blades to make sure that its pointing at 12 oclock. If not then you need to take the cover ...

...with the heater not coming on. If your icemaker advances then the termostat is calling for it. The ejector blade would bounce from the 1 oclock to the 2 oclock position until the heater warms the ...

Question about Refrigerator Ice Maker

1 Answer

...display then remove the cover and turn the smaller gear with a 5/16 screw counter clockwise. The ejector blade will get to 2 oclock when it will go on its own. When the ejector blade reaches 10 ...

Question about CO2075F-B Echelon Refrigerator Ice Maker Combination

2 Answers

...Inspect the water supply line Test the shutoff switch Check the freezer temperature Inspect the ejector gear Test the ejector motor Test the ice mold heater Test the holding switch Test the water ...

...same time) use a 5/16 nutdriver or socket on the small gear. Turn it counter clockwise. Whent he ejector blade reaches 1 or 2 oclock it should take off by itself. When the ejector blade reaches 10 ...

Question about Icemaker

1 Answer

...START The first thing is what is the model? If you have a stand alone icemaker then make sure the ejector blade is pointing at 12 oclock. Then turn the switch to on position. The compressor and fan ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top U-Line Refrigerator Experts

Elie Balas

Level 2 Expert

170 Answers

Marvin
Marvin

Level 3 Expert

85020 Answers

brokenrubber

Level 2 Expert

103 Answers

Are you an U-Line Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...