Questions & Answers for: eec relay f150 replacement

...EEC. Check the relay contact and clean and check all grounding wires. The heart of the fuel/ignition system is the EEC. Other components involved are the fuel and EEC relays. You could have corroded ...

Ad

Question about 1996 F150 Regular Cab

1 Answer

...relay, tank selector, EEC, and fuel filter. it will now run at idle for about 10 seconds then die. if i press on the gas it will shut off quicker. i dont know what else to do or even what the problem ...

Ad

...engine compartment next to EEC relay. if the truck does not get fuel you need to check the inertia swith under the dash above the brake pedal. there is a red button if it popped up then push it ...

...eec computer located on my 1991 f150 300 straight 6 my fuel pump wont shut off with keys in my pocket. i already replace the ignition switch and fuel pump rely. any suggetions on what it could be. It ...

Question about 1994 F150 Styleside Supercab

1 Answer

...blown no manuel If the check engine light is on, there may be something else wrong with it, the relay for the fuel pump is on the drivers side fender it should be labeled. One says EEC, TOW and

Question about 1994 F150 Styleside Supercab

2 Answers

can't start but can crank?what are the possible problems. check for spark /fuel /fuses/fuel pump relay 1992 ford f150 4.9 litre duel fuel sometimes runs replaced distributor and coil and eec module

Question about 1988 F 150

2 Answers

...eec relay tommorro but i would like to know how to bypass the eec power so that i can put power strait to my pump and then ill know its the eec relay cause it holds the power for the fp relay, but i ...

...EEC relay and see if it is bad. This relay is brown and on the left side of the engine bay. The yellow wire and the red and green wire should have power to them. It's either the relay or a broken ...

Question about 1990 F150

1 Answer

...EEC relay. Unplug both of these relays and inspect for corrosion, broken pins, and corrosion. A problem with either relay will cause the fuel pump not to run as the EEC relay controls the fuel pump ...

...EEC relay. When the fuel pump is grounded by the computer it sends power to the inertia switch then to the pumps and controls. If you are not getting main power to the relay the fuseable link (yellow ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...