Questions & Answers for: edger wont prime

Question about Gas Mini - Tiller/Edger

1 Answer

wont prime the gas I replaced the fuel line and filter but for some reason when you push to prime the fuel it will not pull the gas from the tank.. what should i do to fix that??? thanks Pam The ...

Ad

Question about Rapid Loader, Trimmer Head

1 Answer

...keep running ball wont prime you can check the filter in the tank just blow the filter out if that don't work check the lines going to the bulb if you have change the bulb out change the lines ...

Ad

Question about Rapid Loader, Trimmer Head

1 Answer

...wont stay running when it's cold out side. It worked in the fall when I tested the engine. Now it starts after I prime it, but shuts off after a second. make sure you are using the correct fuel/oil ...

Question about 25cc Gas Line Trimmer

1 Answer

right fuel mix spark but wont start..priming bulb stays down-doesnt pop up. trimmer wont start.clean air filter too. Your carburetor is plugged. What's happening, is the carb can't get fuel via the ...

Question about 25cc Gas Line Trimmer

2 Answers

...wont start dont know if lines are in correct position make sure you prime the line with it NOT attached to carb to make sure its gettting fuel first then try to start Have a featherlite plus xt 250. ...

Question about 25cc Gas Line Trimmer

1 Answer

primer bulb wont prime Hi, Check the plastic tubes that go into the gas tank... the ethanol in the gas these days is rotting the tubing... it will break right off inside the gas tank... heatman101

...If theres any holes in the line it will just **** air and cant create suction to pull fuel into it. If its not in the line check the prime ball itself. If there is a hole in it it wont work

Question about 25cc Gas Line Trimmer

1 Answer

...wont go threw the prime buble check for a break or crack in the fuel lines. especially where the line goes through the tank. I am guessing you are sucking air versus pulling fuel. the primer bulb ...

Question about 25cc Gas Line Trimmer

1 Answer

...wont start Be sure that you have the correct mixture of gas and oil. Prime the carburetor, adjust the choke, then pull the rope. Sometimes initially you may need to do the priming processes several ...

Question about 25cc Gas Line Trimmer

1 Answer

...c26 weed eater Will not prime. Has new primer ball and both lines are brand new. Can't get fuel from the tank to the carb. Plz help Lots of help videos on youtube. ryobi weed wacker wont prime ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...