Questions & Answers for: ecg paper change

my machine needs the ink changed? how do I do this There is no ink in that model, it is a thermal printer. You might have the wrong paper or a bad print head or a bad print roller. To test this. Get ...

THE DATE KEEPS CHANGING AND IT SHOOTS OUT ONE PAGE BFORE IT PRINTS THE EKG? the date is changing because the internal battery which is about the size of a quarter has gone bad. if you are handy with a

The ECG is printing very lightly . Do I need to change the roller? try a new pad of paper if that didnt work then you need a new print head..

ECG trace is getting too thick, making the visualization and interpretation. The change is seen in all leads, but is more intense in the limbs. It would be a problem with the filter? There are ways to

just ordered a schiller at1 ekg machine, just realized it is 3 channel, does it have a 1 channel mode where just one tracing will print? hi, u can make it single channel one by changing its setup. it ...

...ecg paper however before conncting this leads there is noise see in screen hi, check the patient cable. if there is any break ( inside ) in the lead it will this problem can occur. also check is the ...

...ECG The problem is that the paper wanders out the paper sensor area and i get out of paper signal. The paper tray is 211 mm the paper size is 209 mm and no matter what i do the paper goes 1,5 mm down ...

change the paper now it is not printing with new paper. What should I do? Our EKG machines at work have specific paper that will only work with them, are you using the same type as before? Also, it is

...paper. It does not also function when using the battery alone. it needsto be directly plugged. hi, You have to check the battery of you machine. it is recommended that you have to take ECG with ...

...change the paper and now machine runs only in manual mode only. I want to run it in auto mode. Be certain that you have the correct paper in your unit. THe Schiller AT2 uses a black Que mark on the ...