Questions & Answers for: Mitsubishi Lancer easy snap

Question about 2002 Lancer

2 Answers

...begin... Most of all make sure you do not break any bolt (there are 6). $ of them will be quite easy to remove but watch out for the 2 last nuts... It will be rusted. Removing the bolts will ...

Ad

Question about 2006 Lancer

1 Answer

How to take the front grill Out Besides the 4 snap rivets ...what are the other screws or rivet i have to remove inorder to take the front grill of lancer 06 model out? you can try your local dealer ...

Ad

1999 lancer ignition barrel snapped off by thieves, tried to hotwire it but couldnt and now our car doesnt go...want to try to get help before paying hundreds to take it to a garage. HELP hey there's ...

Question about 2002 Lancer

1 Answer

snapped wiper control arm I snapped my wiper control arm this morning. Is it easy to fix?? Hi there. the wiper control arm, if it is the outer one it can be easy to replace. Just remove the cap at the

Question about 2003 Lancer

1 Answer

...whrere that knob used to do the pricess for me?? Like a heat air switch? I know there has to b an easy fix instead of paying 400-500$ that i dont have.. Something!, anything! Just to get me through ...

2002 Lancer is running fine is turning over 70,000 miles soon should timing belt be replaced? Timing belts should be changes every 50-70K miles. Even though its running fine, the belt can get worn out

Question about 2003 Lancer

1 Answer

2006 mitsubishi lancer, i put a book under drivers seat and it pulled srs plug apart. I snapped back together but light stayed on. Someone told me directions to reset. I needed battery anyway so I ...

transmission to bell housing guide pin what is the true name for this part? the car has two of them it guides the trans to bolt it to the motor. when repl the clutch. one of mine has snap off. dale

replace ac pulley on 2003 mitsubishi lancer Can the pulley be replaced and if so what tools are needed to do it? did the ac compressor seize up and the pully snap off or is it making alot of noise and

automatic transmission not shifting gears my lancer has set for 6 months and now when I put it in drive it is the same as neutral. gears 1, 2, and 3 work but no drive gear you have blowen the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...