Questions & Answers for: ease tension

Question about TF6iHRC Treadmill

1 Answer

...ease the tension on the spring so I can remove the old motor and replace with the new one. there is no method to ease the tension of the spring. I just used vice grips to grab the end of the spring ...

Ad

...ease the tension pulley before putting the belt on. I know once I get the tensioner eased that getting it re-tensioned will be a piece of cake. I hope that makes sense. You may not need a serp tool. ...

Ad

is the "center" pulley. It is attached to the engine block with an "arm" that is spring-loaded. The center of the tensioner has a 1/2" slot for using a 1/2" socket wrench or handle to ease the tension

Question about 1999 Silverado 1500

1 Answer

...pulley that belt has a spring loaded tensioner, you will have to release the tension and re install the belt. Can pull the tensioner back with a wrench, slide the belt on then ease off of the ...

Question about 1999 Silverado 1500

1 Answer

...ratchet in the hole and pull up or push down to release the tension off the belt. Once you have released the tension pull belt off of one pulley and you can ease up on ratchet and take ratchet

...tension on the timeing belt to replace the top idler pulley by loosing the tensioner which is on the left side you need a long extension ans a 8 mm im not sure about that, but dont take the tensioner ...

...tension to ease up to put it on the pulley Do you have the tensioner arm pulled back with the special tool? The tensioner must be full deflected to get the belt on, it is a really heavy

...ease the tension off to get my alternator rmoved I can get you a diagram if you tell me which engine you have.The tensioner will have a square hole in it to fit a 1/2 inch ratchet or breaker bar to ...

Question about 1990 F150

1 Answer

1990 f150 ford how tighten belt release the tension by using a 15mm wrench on the tensioner pulley bolt then slip the Belt off a pulley and ease the tensioner back slowly ( don't let it snap back )

My babylock 2150 bobin thread gets stuck easely The bobin thread keeps breaking https://www.gatheringthread.com/bobbin-tension/ https://m.youtube.com/watch?v=2X40NO-5xBc https://babylock.com/learn-and

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Exercise & Fitness Experts

Sportsmith LLC
Sportsmith LLC

Level 3 Expert

920 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you an Exercise & Fitness Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...