Questions & Answers for: dyson wheel turning

...dyson.com website had a solution for this particular problem. Just press in a button in the area around the right wheel while lifting the rear of the vacuum up. This allows the base to roll forward ...

...Dyson model you have has a protected brush model (i.e. roller wheel at the side that goes up automatically to turn off the brush roll) then the belt will have to be replaced by a Dyson engineer. If ...

...Dyson upright hoover wheels dont seem to be turning, and it is picking up fine with the hose but not from bottom. Making a bit of a noise. Remove the bottom cover and check for broken belt. There may ...

...wheel cover, and rotating the plastic piece clock-wise or counter clock-wise until it locks into position. It's a big pain but it works for now. I wish I could find a replacement piece online. Patty ...

DYSON DC-11 MOTOR REPLACEMENT1. Remove dirt cylinders as normal2. Using large flat screwdriver, remove airway splitter and hose3. Undo 6 Torx screws from top and one at the back under tool holder 

Dyson DC44 Animal - Will not run continuously, cut in and out? We have cleaned and cleaned this thing, my wife is ready to throw it over the gallery edge. Still will not run on a continuous basis. ...

why does the dyson DC07 pull so hard all at once Check the bottom plate for scratches, broken parts or missing wheels. Make sure all wheels turn freely

...wheel will still turn... what does the blinking light mean The light means something is wrong. It would be best to have it serviced at a qualified repair facility Hi there, it's Jack at Dyson. DC28's ...

...Dyson Ball is difficult to turn, you are using it wrong. It must be moving as you turn in the same way a car steering wheel is easy to turn when rolling and hard sitting on the drive with the engine ...

The power that pulls my Dyson vacuum is not working Motor is running. Wheels turn. Power to pull the machine is not working. I don't know of any Dyson models that are self-propelled. What is your ...