Questions & Answers for: dyson switch handle working

Dyson is dead, i've replaced the on/off switch with no change. To get at the switch, firstly pull off the bag/syphon box and then remove the handle. Behind the handle you will find 2 torx screws and 3

...dyson should work with or with out the hose wand (handle), so I think its more like the mains lead or the switch is faulty, do you know how to do a continuity test, with a tester? if not you may have ...

Dyson. If the suction is good from the base but not from the wand, this would indicate that there is a blockage in the wand handle or hose. To test this, stand the machine upright and release the wand

Dyson. The brush control is designed to switch the brush bar off automatically when you stand the machine back into the upright position. It is designed this way to protect any delicate floor surfaces

...dyson 07. Vacuum works fine, great suction using the hose. How do I switch to using the carpet vacuum. (I lost my instruction book) Thanks If this unit has a suction hose built in to the handle, the ...

Dyson dc24 roller brush stopped spinning roller brush stopped spinning the reset button didn't work so i assumed the motor had gone so i replaced the brushbar motor but still wasn't ...

...switch on the front to turn the brush bar on and off. ...

dyson dc 25 does not work correctly when foot pedal is pressed to begin vacuuming Lol, it doesn't have a foot switch :>) The on and off switch is on the handle. Part number 5 half was down the page