...brush wont turn I had a big clog in the hole from the bottom (where the brush is) to the inner part. I unclogged that and cleaned the brush. Now I have good suction but the brush still wont turn. You ...
Question about DC14 Animal Bagless Upright Cyclonic Vacuum
Dyson dc14 animal is falling apart! The canister keeps falling our and now the carpet/floor adjuster doesn't work AND the brush wont turn....tried everything. I live in Half Moon Bay, CA (near San ...
it wont vaccum the bar wont move but there is suction at the hose end dyson 14 If the brush isn't turning you need to replace the belts. You can get replacement belts here: Dyson DC14 Belts
my brush won't turn MY brush wont turn. I clean it ofter so there isn't any real build up. Need to get it fixed asap due to easter.. Check /replace belts..Happy Easter
Question about DC14 Animal Bagless Upright Cyclonic Vacuum
i have a dyson dc14 the vacuum has suction but the brush wont turn nor will the belt I just bought a dyson, they have a 5 year warranty on parts and labor, maybe try calling them.
Question about DC14 Animal Bagless Upright Cyclonic Vacuum
...dyson dc14. the belt smells a little too. thanx, trixie Sounds like the beater bar is frozen in place. This sometimes happens when the ends of the bar become stuck in the holders. The solution is to ...
Question about DC14 Animal Bagless Upright Cyclonic Vacuum
The brush wont turn on my dyson DC 14 Sounds as if you need to replace the brush belt. Jim Let me know if this helps.
Question about DC14 Animal Bagless Upright Cyclonic Vacuum
...Dyson wont start it trys then cuts out i just turned on for a second so i thought there was a blockage so i cleaned the brush and freed the wheel checked the hoses were clear then left if over night ...
Brush wont turn I have checked all the connections on the brush. No smell, no previous problem. Just stopped turning. The brush may need to be reset via the button next to it. Also remove any hair ...
Question about DC33 Multi-Floor Upright Bagless Vacuum Cleaner
...By Removing Cover(s) Next To Beater Bar (on bottom) You have probably switched off the clutch by mistake. Take a read of this article: The Brush Roll Wont Turn Dyson DC04 Dyson DC07 and Dyson ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions