Questions & Answers for: dyson dc07 animal brush spinning

Dyson Animal dc07 -- change belt Dyson Animal dc07 -- beater bar is not rotating. Belt is not broken. I suspect it has slipped off inside -- how do I disassemble to check belt? Read the manual -- ...

...dyson DC07 has no suction. motor runs, brush spins, just no suction. hi..the reason to this problem may be the bottom pieces might not have been fully seated.Take it apart and put it carefully back ...

Belt not broken but brushes not spinning - picks up hair but not small particles belt not broren but brushes not spinning

...Dyson animal will not turn Hi its Darran at Dyson. Check that the brush control dial is in the centre position when upright and then moves forward when the head is released. If the brush bar is still ...

...Dyson DC07 animal suddenly isn't picking up hair from the carpet like it use to. Suction seems fine. The brush seems to stop spinning at slightest touch however, and I believe it stops often simply ...

...i turned it back on it wouldnt spin, i tried cleaning it out and that didnt help any ideas? Was the belt worn or broken? It probably needs to be replaced. Here is the belt you need: Dyson DC07 ...

the bottom brush does not spin although you can still get suction from the hand held pipe Have a look at the following link: http://www.dysonmedic.com/DC07%20Folder/DC07%20page.html

Dyson DC07. 1. The carpet / hard floor selector is set to hard floors. 2. There is material wound around the brush to the point that it is jammed. 3. The brush roller bearings are full of dust and ***

...DC07 Bagless Upright Cyclonic Vacuum ProblemWe have an Animal..brush spins, motor works, NO suction except through the hose attachments! Hi, We tried all above an still no suction on bottom and ...

...take it to a Dyson service center. If it is a DC07 check for obstructions in the brush roll. If none there check the belt or the clutch assembly depending on if you have a clutch or not on your