Questions & Answers for: dyson brush spinning

brush on my Dyson DC-14 wont spin My Dyson was working fine then I heard a weird noise and the brush stopped spinning. Is there anything I can do to fix this ? hello, have you checked to make sure you

...spinning i have a rollerball dyson. the vacumm wokers good, but the brushes don,t spin, please help. One problem may be that two small wire are broken that control roller functions. See solution with ...

...dyson dc 25... i the brush bar wont spin on my dyson dc 25... i know I am supposed to do a few steps and hold down a button.. but I cant remember what to do.... Hi its Darran at Dyson. Simply switch ...

...Dyson DC 24 and the brush stopped spinning because it was clogged. I removed all of the hair etc. and replaced the brush, but it still is not spinning. Any suggestions? If you've had the brush out to ...

...brush bar dyson dc14 animal The brush won't spin on my dyson DC14 animal (purple one) I'm pretty sure the brush is installed correctly (I've cleaned and re-installed many times over the years) but ...

brush bar from Dyson. I have installed the brand new brush bar and still have the same problem. It does not spin and i unable to use the vacuum however the handheld attachments still work. Please help

brush bar from Dyson. I have installed the brand new brush bar and still have the same problem. It does not spin and i unable to use the vacuum however the handheld attachments still work. Please help

...brush not work on dyson dc26 With this model, the most likely cause is that the brush has become clogged and won't spin freely. Unplug the unit and test spinning the brush bar by hand. If you really ...

Dyson DC25 brush won't spin when touching the floor. If I lift it off the floor it spins, once it touches the floor it stops. Any idea what the problem is? I can think of three things that could be ...

Dyson DC50 brush bar spins and then stops, there is a rubber gasket under the brush bar that is causing a lot of resistance. Is it supposed to be free spinning or greased? I removed the gasket(middle ...