suction My Dyson vacuum works fine for cleaning the rug but the hose doesnt get any suction at all. I removed the hose and all the parts around it that I could and dont see any clogs or broken pieces.
Question about DC07 Bagless Upright Cyclonic Vacuum
...dyson has suction but I cannot use the hose when it is on. The hose will stretch easily when it is turned off (like it did when I first bought it) but when it is turned on it is so hard to stretch it ...
...suction in hose/attachments so not able to get to small hard to reach places. Suction not appearing to work right through hose? hi samdan... have you checked all the hose attachment vents .. ie Under ...
Question about DC07 All Floors Bagless Upright Cyclonic Vacuum
Dyson DC7 full Kit, with one belt does not get suction to head. Suction seems fine with the hose. The brush is spinning. I've checked filter, made sure it's reattached tightly. I've checked for ...
...suction! Have a DC05 Absolute plus model; I have emptied the cylinder and it doesn't make much difference; Creates lots of heat and noise but just not much suction you can tell if the vacuum is not ...
Question about DCO3 Absolute Bagless Upright Cyclonic Vacuum
when using the hose alot of suction is it a motor problem how do i fix it plz bagless up rite It could be your belt, if it is loose it will not turn the roter at its max power which means less suction
Question about DCO3 Absolute Bagless Upright Cyclonic Vacuum
...Dyson absolute vaccume has no suction. I have cleaned the filters, visually checked all of the hoses. there is no suction from the floor brush or the wand. Check the ducting that goes from the floor ...
Question about DC17 Animal Bagless Upright Cyclonic Vacuum
...dyson absolute have taken plastic housing off at the bend to check for clogs. none. took it to vac store repair and they could not figure it out. it will vac from the bottom, but there is no suction ...
Question about DC17 Animal Bagless Upright Cyclonic Vacuum
...dyson absolute runs but there is no suction. When I pull back to start vacuuming, it continues to cycle, but just spits out what it picks up. I took it apart to clean and take out any clogs. Still ...
dyson absolute In the upright position no power int the vacuum position full power but with only about 10% to 0 suction power the hose section zero % function. Your hose is clogged. Take it off and ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions