Questions & Answers for: dynex screws

...base I have a dynex 37" DX-LCD37-09 and want halp removing the base not sure which screws to remove Remove the four small phillips screws facing the back of the TV/Base and the whole base will come ...

...dynex 37" lcd tv but can't figure our which screws to remove to get the base off. I removed 5 screws from the bottom (on I had it mounted on the wall), but the base is now just loose, but I can't get ...

...screws for Dynex 32" TV, which size? We have a Dynex 32" TV, and a wall mount, but we don't have the screws that affix the TV to the mount. What type of screws are used to mount a Dynex 32" TV on a ...

...screws fit into the back of the TV so I can mount the TV on the wall. I have a Dynex model # DX-32L150A11. I don't have the owners manual. I went to Lowes and found some 4mm .7 screws, 25mm long, and ...

I dont have a crimping tool what can I use in its place to install the DYNEX CAT5 Plugs, and where exactly do I do the squeezing at to lock the cable on you can use flat precission screw driver and a ...

HOW TO INSTALL DYNEX DESKTOP 10/100 MBPS PCI NETWORK CARD Remove the case cover from your desktop computer.Remove a cover strip from a PCI expansion slot.Insert the Dynex network card into this PCI ...

I am trying to warm out my 40 inch TV Dynex but it doesn't have the screws to screw it to the mount any help on where I can get some Warm out?

...screws attach the swivel base to the Dynex LCD-TV Model DX LDVD19 10-A? There are screw holes. Many thanks!!! take it to a repair shop and have them check the hole size they may actually have screws ...

m4 nor m6 screws fit the back of dynex tv. one is too small other too large?? try m5 screws--- they are available check if the unit is USA made it will have unf threads

what screw size should i use to attach the base to my 32 inch dynex flat sceen tv? Contact Dynex. Screws must be of the specified metric size and length for safety.