Questions & Answers for: dyna glo ventless heaters gas

dyna glo ventless rmc50 ngt can this heater be changed from natural gas to propane use, a local heating shop told me it cant be done All gas heaters can be converted from one type of gas to another, ...

...dyna glo) 3 years old, pilot light will not light, get good spark but will not flame. Checked all connections from tank to heater-no problems, propane not coming thru heater to ignitor. What do I do? ...

...ventless propane heater 15,000btu. The pilot light shuts down when trying to relight the unit. The light will stay on until I turn the heat control from pilot setting to low or above. Try to take ...

i have a dyna glo ventless model fp 65 30,000 btu flame doesnt burn very high It would be ideal to take it apart and blow it out but you could try vacuuming out the grates real good.

I have a dyna glo 30,000 btu lp ventless wall heater and can not light it even with a lighter. I know it needs an ingniter, but will that no let gas thru I have already answered this

...dyna glo 30,000btu lp ventless wall heater. I know it needs the ingniter replaced. I have tried to light it by hand and can not. It seams like their is know gas getting thru,is this possible yes you ...

dyna glo RMC 40 NGT vent less wall heater that I would like to convert to propane, I need to know which conversion kit to buy, and where. Thank you. dyna glo natural gas heater Questions & Answers

...dyna-glo 20,000 btu ventless wall heater and the flames are burning way too high so much so it's blackened the white part above the grate what could be wrong possible regulator problem or incorrect ...

...Dyna Glo ventless natural gas wall heater. I'm getting strong gas order from the heater Sounds like the pilot light is not lit 're light it if you know how if not revert to manual if it persists call ...

Dyna-glo Natural Gas heater, can I convert to propane? I got an IR30NTDG-1/NMDG-1 ventless heater that I'd like to convert to propane. Is there a kit for this? If so, where would I find it? Thank you ...