Questions & Answers for: dw938

how to connect correctly the wires on the switch One of the terminals should be labeled M2. That one gets the red lead.

Can I use a 18 volt XRP battery in the DeWalt DW938 Reciprocating saw? Yes. Dewalt says the 18volt XRP battery is compatible with all Dewalt 18volt tools Have a great day. The DC9096 battery is also ...

I have a DW938 and I cannot get the blade to lock into place seems like there is no lock at all. Hi, If you look at the end where the blade goes in, on the right hand side (as holding it for use in ...

DEWALT DW938 18VOLT CORDLESS SAWZALL can it use Lithium Batteries As long as the voltage of the battery is the same as the tool, the tool won't mind if the power is coming from a NiCd or lithium ...

I used my saw to cut a drained water line. Apparently a little residual water got into the mechanical end where the blade attaches. I went to use it a week later and noticed some rust and the until ...

DW938 reciprocating saw only works if turned on right side and not at all if turned on left side. Motor appears to be arcing if and when it works. Moderately used and never dropped or wet. There are a

DW938 only works when I bump the underside, forearm and for only moments. could be quite a few things but it is obviously a loose connection in the electrical system, I would suggest going to ...

My Dewalt DW938 battery powered reciprocating saw is eratic as to the reciprocating motion. The motor always turns when the trigger is depressed but the reciprocating action either doesn't start o

the blades come out When sawing the blade falls out The piece that holds the blade in is held in place by a spring that sometimes breaks. eReplacementparts.com has a diagram and sells the springs for ...

broken blade in dewalt sawzall Remove broken blade, install new one. These blades don't change themselves, unfortunately.