DVD player, it's suggested that you make sure the disc you are trying to play is intact and well. 2. If you are sure that there is something wrong with your player, you can press the "Eject" or "Open"
...dvd player. There is also an electronic component that drives that motor but you would need to be an electronic tech to be able to find it and replace it with the right one. Good luck and let me
Question about GBV241 DVD Player/VCR
...Dvd Player/VCR Combo skips and freezes No matter what dvd I put into the dvd player they all end up skipping and stalling. All the dvds I selected were in perfect condition weeks before. Every single ...
...read. Do I need to replace the unit, or just the reader? Common issues causing the dirty disc error are: dirty lenses, lasers wearing out over time, capacitors failing on the control board, grease on ...
DVD recorder / player. I can insert a dvd and it will display an hourglass along with a picture of a 90% full disc and will say ''Reading''. Then after about a minute it will go to a dashed outline of
...player were prone to that. They only cheap solution is to try a dvd laser cleaner. Possible accumulated dust etc is on the eye. Other than that it is probably best to pick up a new player. It's a ...
...dvd recorder has stopped recognising dvds that previously it would play quite happily. Is the likely cause a dirty lens or is it more likely to be something to do with the spindle? I get the "cannot ...
DVD player is open. A dirty lens is most likely the cause of your no-disc error. The lens should be cleaned with isopropyl alcohol and a cotton swab. Here are some suggestions for fixing the "No disc"
...DVD player. Some games also have these regions. If the region of the DVD and that of the player do not match, the disc will not play. i just got an xbox360 game of the internet and its not copying ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
