...but no pic from cable or DVD. Doesn't seem to fit criteria for a new lamp. Green status light is still constant. Any ideas? If no video and OSD is good then: Suspect the Signal PCB part # ...
Question about WD-52525 52" Rear Projection HDTV
...pic - screen is dead. The tube is not energizing, but the sound is OK. I played mp3 files sourced from dvd player in time when TV screen shut down. Still, I am able to watch TV, play DVDs, etcs, ONLY ...
pic i see no picture when i turn on my ps3but i hear sound if you have a SD TV. ( standard display, not HD ) but chose the HD display option on system settings you wont see picture but hear sound. and
Question about STR-DB930 Receiver
...dvd optical input.I have set the ps3 up as it says in the manual (also tried various other settings,and another optical cable).but i am getting no sound,and the display on the amp says "unlock".the ...
far right side of row) I do have to change my TV input to AV on my remote (I have Air, Av1, and HDMI2 with my Direct Satelite) and my Tuner to Dvd so I have pic and sound. Hope this helps someone else
Question about DV-333 DVD Player
...has to be very good to get sound and picture. Try connecting a VCR or a DVD player trough the coax cable and see if it you get sound an pic on Channel 3 or 4. If you do, it is an antenna
Question about PDP4294 42 in. EDTV-Ready Plasma Television
...pic just black screen. but sound was still coming out of my speakers. any suggestions You want to check the power supply for bulged caps and replce if need. Also check and see if the VA & VS ...
pic but hear no sound. I've made sure the TV speakers are on. Not sure what the problem is. Thanks hi, Check the connections you have made between the tv and dvd player, whether you have connected the
...sound but no pics I checked power supply all checked ok I turn tv on sometimes picture would work image may be very cracky so I assumed it was a tcon board replaced tcon board same problem so I ...
pic on my cello 28" DVD combo Check the speakers first. If found OK, check and replace the damaged components at its audio output stage circuit. Contact any service technician. If you wish to get more
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
