Questions & Answers for: dvd drive belt

drive needs cleaning use a DVD/CD Cleaner disk to clean the lens. Replace the rubber belt inside. That rubber belt keeps other rotating parts inside to move faster as the motor is running, replaced it

drive belt for cd/dvd tray Hi. Where can one order a new drive belt for the cd/dvd tray? Mine broke and I used to be somewhat of a DVD repairman, but don't know where to order parts. Any help on this?

...drive works fine with non cartridge mounted DVD RAM discs. Hi, I don't know if you ever solved this problem - but I had the same thing on my SW9571CYY. The solution is to replace the small drive belt ...

...any dvd it ejects it self................. Dear, Your dvd ram is at Ribbon(belt) fault. It can be solved by changing its belt. You can take it to nearest comp hardware expert or its warranty

...dvd drive has broken drive belt. Is a replacement belt available? Just replace the drive look on Ebay you can pick one up for under $20. It doesn't have to be the exact model desktop IDE drives are ...

dvd and will play it, but when I hit the eject button, it says its opening, makes a noise, then says loading. I have tried several times to get it out. Any ideas? thanks [email protected] Either

dvd If it is the same problem as mine, the drive belt is old and worn and is slipping- therefor the tray will not open. I found this out after I removed the metal cover, and the screws holding the DVD

the drive should "unlock" and open slightly. Press the open/close button to fully open the tray. the eject belt of the dvd is loose already thats why it wont eject at all.replace the belts of the dvd

dvd drive model sh-w162 it was not opening i took off compuetr & dismanteled it but was opening & closing ok but dose not read while i was fixing it i found rubber belt i didnt now wheather it

replace drive belt in dvd drive XModdz Repairs DVD Disk Drive Belt Replacement