Questions & Answers for: Toyota dust cover

dust cover and the inner is the seal.... i you've removed the inner, you'll have to refit very carefully, not causing any damage....Lubricate with rubber grease and open the bleed nipple....push it in

...have rocks or dirt stuck in them. The problem is most likely to be with your brakes or even your dust cover for your front rotors. make sure the dust cover is not bent where it is touching the

dust covers on a 1996 toyota camry? there are plastic covers directly on top of you lug nuts remove with four way or socket clockwise direction these plastic caps will screw off releasing wheel cover.

...dust cover plate can rub against the rotor and make a grinding/scraping sound. Raise the car, remove the wheel, and check the clearance between the dust cover and the rotor. If your shocks/struts are ...

...Kilometers) : All Applicable Models INSPECT AUTOMATIC TRANSAXLE FLUID INSPECT BALL JOINT & DUST COVERS INSPECT BALL JOINTS INSPECT BRAKE DISCS/ROTORS INSPECT BRAKE DRUMS & LININGS

...dust cover with the wires going thru it to the light. 1/4 turn counter clockwise if it is a hard cap-if dust cap squeeze and pull. There should be a clip that looks like a bent paper clip. Squeeze to ...

dust cover around the rotor? that will make a noise like a scrubbing sound. an easy way to check is jack it up and use your jackstands for safety, roll the rotors around two or three times, both sides

smog tech can't find timing marks what to do to help tech pass the car the timing marks is just a line on the harmonic balancer  and the other should be on the timing belts dust cover.

...dust cover. remove it, and you should be able to see the tork converter bolts. if it doesn't have a dust cover, the only way to see them, is to loosen the transmission, and slide it back about 2 ...

...dust boot.12Unscrew the bolts to release the lower timing belt cover.Install Your Timing Belt13Wipe off any oil or water on the pulleys.14Align the timing belt's front mark with that of the ...