Questions & Answers for: durango grinding turns

...either your CV joints, or your wheel bearing, also have your upper and lower ball joints looked at, durangos are bad for those going out. 4WD could have additional problems, like transfer case, front ...

...grinding noise out of the right front. I just put new tires on and it did not correct. Could this be a wheel bearing. The Durango is a 4X2, 2003. Thanks, CB sounds like a wheel bearing. if the noise ...

...problem my 99 dodge durango makes a rubbing sound when i back up and a grinding sound when i turn The sound could be related to the universal joint/s. Or otherwise known as 'constant velocity'

...'02 Durango I hear noises like grinding or creaking from rear end while making turns, also hear the noises while in reverse and turning. '02 Durango 4X4 with 138,000 miles. That's the wheel

...Durango 5.9 it makes a noise like a ball rolling in a drum, which would almost make you think there's a hole somehwere. Now, however, I can hear grinding on my left front tire when I turn and ...

My tire is making grinding noise then drivers side tire blew, brake line. Roke and when I put spare tire on you can move the tire back and forth. Any ideas? Your tire is making a grinding noise? Was ...

...Durango make a grinding noise when I turn right When I turn right there is like a grinding noise sounds like you have a bad wheel bearing. the play in the bearing causes the brake rotor to rub on the ...

Durango when I turn right it makes a grinding noise When I turn right it make a grinding noise what causes it could be a hub bearing or axle joint I would have the brake wear checked, the rotor may be

...durango 4x4 im having an issue with a grinding noise comming from the front of the vehical,im not sure if its the front diff. or half shaft or the transmission I have niticed that if im in 4x4 and i ...

...durango won't go when put in drive and it also makes a grinding noise when I place it in park sounds as if the yoke on the transmission or maybe transfer case is damaged so when you put the truck in ...