Clean light stays on I have tried many things and I cannot get the dishwasher to work. There isn't a troubleshooter sheets for this dishwasher. How can I repair this problem? Chamer, do you have high ...
clean light is blinking, have already killed the power, then called to whirlpool and they walked me through resetting it by pushing buttons, however when i attempted to run it after resetting it, it ...
Question about 24 in. DU1100XTP Built-in Dishwasher
clean light flashes and i can't get it to run. Whirlpool told me to ask you what buttons to push? Pleaes help me. From what I have researched, it sounds like a bad circuit board. I am having water ...
clean light flashes MOST OF THE TIME IT MEANS THE HEAT ELEMENT IS BURNT OUT WHEN THE LIGHT FLASHES.
Question about 24 in. DU1100XTPS Built-in Dishwasher
clean light flashes off and on continually, nothing else works Hello- This pump system has a strainer and screen that can trap debris against the pump blades, stopping motor. Turn off power. Pull torx
Question about 24 in. DU1100XTP Built-in Dishwasher
...clean light is blinking then here are some instructions on what may be causing it and how to reset the control. If there are other buttons flashing the user interface (button control panel) has a ...
Question about 24 in. DU1100XTP Built-in Dishwasher
...Clean light My Whirlpool DU1145XTP won't turn on. Clean light is flashing seven times. Start light flashes 3 times when I push it. I saw a spot in heating element glowing red the last time it ran. Do ...
clean light blinks, but dishwasher will not start. Thanks! Margaret This dishwasher is less than 3 years old and is falling apart. The utensil basket is held together with twist ties. :) Hi Thanks for
...clean light is flashing. I tried to do a hard restart (shutting the fuse box switch) that didn't help. Hello This problem can be reset by pressing these buttons in sequence for 3-4 times, please make ...
Question about 24 in. DU1100XTP Built-in Dishwasher
clean light will not go off and allow any other cycle to run Hello & Welcome to FixYa Flashing clean light is reset by pressing two buttons in sequence 3-4 times, to reset your kenmore press these
Usually answered in minutes!
915 Questions
809 Questions
800 Questions
690 Questions
469 Questions