P1646 and P0706 were read. Seems likely it is just a transmission cable adjustment needed. Please see my whole note (not a musical whole note) above under Clarification... I'd go to this site and read
...DTC P1646 code, bank1 sensor1 oxygen sensor failure. My question is two part; first where is the sensor located on my car and two which sensor shoud I buy? There appear to be two types of sensors, ...
DTC P0155 is set, measure voltage between ground and terminal No. 4 (Yellow/Red wire) at ECM harness E10. Voltage should be 9-14 volts at each terminal. If voltage is as specified, replace ECM. If not
P1646 Indicates a Power-train fault The fault is generally due to a problem in the Computer & Output Circuit area Fault Description:ECM HO2 Sensor control malfunction -bank 1 upstream (1/1) Action
P1646 Indicates a Power-train fault The fault is generally due to a problem in the Computer & Output Circuit area Fault Description:ECM HO2 Sensor control malfunction -bank 1 upstream (1/1) Action
P1646 Indicates a Power-train fault The fault is generally due to a problem in the Computer & Output Circuit area Fault Description:ECM HO2 Sensor control malfunction -bank 1 upstream (1/1) Action
Question about 2002 X-Type
...DTC P1001 Key on engine running unable to complete; key on engine running aborted P1100 Mass air flow sensor intermittent P1101 Mass air flow sensor out of self test range P1104 Mass Airflow (MAF) ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions