Questions & Answers for: dryer wont pause

...wont let us run the dryer - Error codes. are any of these lit? PF Power failure "PF" flashes to indicate that a power failure occurred while the dryer was running. Press HOLD TO START to continue the ...

...dryer wont start. The start touch pad led is flashing while pause red led is steady on. How i may reset the pause led. Thanks; Frank Rodriguez you can't get alot of parts for this dryer anymore,not ...

...start the control locked light is on and wont reset . turned power off and let set then turned back on .control locked light is on all the time .will not run try this,,,press pause /cancel botton ...

pauses when button is pushed to start, sometimes pauses when button is pushed to start, most times will not start at all or runs for 10 minutes then wont restart Sounds like capacitor may be faulty - ...

...dryer wont start and the lock button is on 1) Press and hold the End Of Cycle Signal button for 3 seconds to turn this feature off. 2) When the dryer is running and Control lLcked light is on, the ...

The dryer sounds like it engages the motor but it will not start running...it just "hums" when you push the Start/Pause button. http://www.partselect.com/dryer+dryer-wont-start+repair.htm

...dryer and wont start Hi, There can be many reasons why your dryer will not start or turn... The most common causes are the belt breaking or jumping off, or the motor goingbad... Here are a couple of ...

...DRYER WONT WORK.POWER BUTTON WILL NOT POWER DOWN AND PAUSE START BUTTON WILL DO NOTHING. OPEN AND CLOSE DOOR.THE PAUSE START BUTTON JUST BLINKS.AFTER PRESSING THE BUTTON THE MACHINE DOES NOTHING.IT ...

wont turn on I loaded the dryer with a normal load. It turned on and then just stopped and now wont turn back on. What can i do?? WAKE THE WASHER BY PRESSING ANY BUTTON. WAIT 5 SECONDS. PRESS AND HOLD

working fine and now it won't start When I push start, the dryer hums and then flashes on pause. It won't start The hum normally comes from the motor trying to start turning but wont.....motor problem