Questions & Answers for: Zanussi drum weight Washing Machines

Ad

Question about FLA1001W Front Load Washer

1 Answer

...weight of the drum and lower it on to the dampers. Now carefully lie the machine on it's front mark and unplug all the wires cut the tie that holds the wires to the outer drum unbolt the 2 bolts that ...

Ad

Question about FJD1666W Front Load Washer

3 Answers

Drum Bearings replacement How do I remove and change the drum bearings? This is Mogsey above, I have now renewed the bearings in my Zanussi Jetsystem 1600, Model FJD1666W. Had a man in to help. It ...

Ad

Question about ZWF1430W Front Load Washer

1 Answer

...Dont put loads of clothes in, the zanussi has a sensor which, if the weight in the drum is not dispersed evenly it will not reach the final speed. best to take some clothes out it should work ok ...

Question about FJS1225W Front Load Washer

1 Answer

...weight you need in the drum, so I added some towels to the drum to weigh it down. Same problem occurs, i.e. press start button, sound of machine starting up with drainage(checked as I pulled machine ...

Question about F1045W Front Load Washer

1 Answer

...drum bottom...........look inside when its filling..........if its filling to nearly the bottom of the door you either have a faulty pressure switch or grit/dirt in the internal filter.......as a ...

Question about ZWF1630 Front Load Washer

1 Answer

...drum removed from the machine completeley, the only thing holding them together should be a rubber gasket, Have you taken the weight from the front and removed all the screws behind the weight? could ...

Question about FLA1001W Front Load Washer

1 Answer

drum banging is it bearing when on spin Hi, This is difficult to work out as there are so many different symptoms. Here are my thoughts - Dust from carbon rushes is black. Grey dust usually comes from

Question about ZWD1470W Front Load Washer / Dryer

1 Answer

loud grinding noise when machine operating Hi The most common cause of this is the main drum bearing seal has failed and water has washed all the grease out of the drum bearing and knackered it. You ...

Question about FLA1201W Front Load Washer

1 Answer

Spinning cycle has become very noisy on fast spin Hi The most common cause of this is the main drum bearing seal has failed and water has washed all the grease out of the drum bearing and knackered it

Question about FLA1201W Front Load Washer

1 Answer

...the machine is new or when moved the packers may have replaced the movement pins this stops the drum swinging around and damaging the outer casing. if used with them still in the drum can not ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...