Questions & Answers for: Kenmore drum weight

Ad

Question about 3.8 cu. ft. HE3 Front Load Washer

1 Answer

...drum that something could have gotten between? Or counter weight loose? How can I check safely? Does the toe plate come off easily, etc.? coins inbetween bowl can be a problem try tacking machine ...

Ad

...drum. do not overtighten them as you risk breaking the posts off. have a look under the lid. if the weights aren't loose check under the machine for the suspension may be disengaged. indesit ...

Ad

...of it running stopped. Had no signs of any problem at all prior to this. The weight of the wet cushion broke the drum belt. A good handyman can do it or, it's not a terribly expensive service

Question about HE2 Plus Front Load Washer

1 Answer

...weight had come off the drum and fallen to the bottom of the machine. Reattached it and knocking has stopped, lucky it didn't trash the machine as it is normally attached to the top of the

Question about HE2 Plus Front Load Washer

1 Answer

...weights are in place and everything looks good. What can I do? Thanks. open the door and turn the drum by hand push and pull the drum you may find that the bolt holding the drum in place has come ...

Question about HE2 Plus Front Load Washer

1 Answer

...weight on the top of the drum (a quarter round cinderblock) which should be bolted to the top of the drum. If it is not, bolt it back to the top of the drum if it is not broken which you will have ...

Question about 22422 Top Load Washer

1 Answer

...drum is in a sense sitting on a barring , it sounds like your barring is going out. Works with no weight, and if helping as you said. Normally means barring is worn out and can not handle any

Question about HE2 Plus Front Load Washer

1 Answer

and the larger the drum the more weight and I doubt they use larger bearings for more cubic feet machines. They need a buddy bearing or some sort of support to take all the weight off the rear bearing

the button the drum stops.When I push the start button the drum starts turning but when I release I replaced the start button and the door switch and still have the same problem. it's the start switch

...Washer/Drier Model #110.88752796 There are usually cement balance weights on the bottom of the drum mechanism. One could have come loose, and/or the drum is hitting the support posts in the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machine Experts

fordexpert

Level 3 Expert

5692 Answers

Kristen Denison
Kristen Denison

Level 1 Expert

13 Answers

Gordon Richard...

Level 2 Expert

250 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...