...brake mod.-drums to discs 1974 mazda 1000 ute. has anyone done a conversion of replacing drums to discs on front of a mazda 1000 ute 74 model? I recommend getting a conversion kit, if there is one ...
...brake shoes were welded to the bad drums. I iinstaled new shoes drums & spring kit The pedal did not come up.But I devloped a hammering from the rear of the van. The brakes were hammering. I was ...
drum to disc brake conversion kit. Not that difficult to install. The kit should have everything you need. Check with EMPI. Good VW parts source. If there is such a modification..(and im assuming that
...drum brake to disk brake conversion hi, i would like to convert my trucks's rear drum brakes to discs. my truck is a 1994 chevrolet cheyenne k2500HD "8 lug" rear end is 14 bolt 9 1/2 are there any ...
...brake conversion kit on 1996 dodge 2500 do you need to change the master cylinder ? No you do not need to change the master cylinder if the conversion kit is made for this car. Just will definately ...
...drum breaks to disc breaks this can be a big job u need new master cylinder, proportioning valve, conversion kit (or donor car) for rear hubs, rotors etc. if has anti-lock brake system gets even more ...
...Brake jobs are pretty straight forward. On a 1996 mini van I am guessing you have disk brakes in the front and drums in the rear. Disk brakes are a breeze to work on. Two bolts to take your calipers ...
Question about 1995 Thunderbird
...drum to disk can i use any other ford parts to do this on my 65 thunderbird drum to disk on 65 thunderbird No there are not any direct bolt ons from other years. You can buy kits from many ...
Question about Combination Disc/Drum Brake Lathe
...drum brakes to disk brakes? A conversion will be very expensive, and might not give you the results you expect. A brake system needs to be thought out carefully to work out all the details before you ...
drum brakes for disk brakes can anyone give me some advice on a kit for that for one, a "cheap" tune up is never recommended for any vehicle. always use quality parts and when doing it, always replace
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions