Questions & Answers for: drum light staying brother hl

...Drum still had plenty of life... I tried the "printer reset to defaults" instruction provided by Brother to no avail (i.e., hold the go button down while turning the printer on) the LEDs remain lit ...

...getting a new cartridge but to no avail. My toner light stays on!!! Open the toner door, then press and hold the 'Go' button till all the lights are lite, this will reset your drum

...Drum" led light. Everything still worked good so I ignored the light implementing the strategy of: "If it ain't broke, don't fix it". I recently moved to a new location and when I reconnected my ...

...light stays on & I can't print. Sounds like it sensed this as a paper jam. If it is your Paper LED that is stuck on: We have a few of the HL-2070N's and I have seen this issue on a few of them. ...

...drum light still flashes. By the directions it should have turned the light out. I have 2 Brother HL 2040 printers that have stopped printing when I changed the toner. I need to know if there is a ...

Drum light HL-2040 Brother Drum light is on, I changed the Drum and it is STILL on, any ideas? Open the front cover. Locate the control panel button under the LED lights on the left side. Press the ...

drum light is staying on on my brother HL2040 printer. I just replaced the toner a week ago, and now the printer won't pull paper or anything. Try this, Push and hold the "start" buttom for 1min until

drum light stay on but it will not let me print? How do I replace the drum? First time user. In most cases, if you are going to replace it yourself, when you order the new drum it should come with ...

...the light will still not go away. I then tried a brand new toner with a brand new drum and the light still continues to stay on. What should I try next? Open cartridge and then reset side white ...

...DRUM LIGHT STAY ON AFTER CHANGING You havent reset the drum counter on the printer. Simply open the front cover, and hold the "GO" button until all four LED's are lit. Release the "GO" button and ...