Questions & Answers for: Bowflex drive motors

...failing. The treads aren't moving but the monitor is trying to calibrate. The motor must move the drive pulley for calibration to pass. remove rear covers and check drive belt. you should hear the ...

TC5000 and after extended use I smell burning and upon removing the belt cover and drive belt I felt of the motor on the motor side of the drive pulley and it was ''red-hot'', obviously the source of ...

machine froze up and smells funny Remove left side plastic drive cover to expose ?v? drivebelt. Loosen nut on the motor tension bolt located on front side of motor in ½ turn increments until ...

...if necessary.If slipping feel persists after several adjustments, stop and see if it maybe the drive belt. Remove left rear plastic cover to expose ?v? belt drive line and motor. Tighten nut on ...

I am getting power to the treadclimber, however the belts will not move, and yes I am changing the speed. All of the numbers on the panels come on. hi, ur treadmills motor controlling section have ...

...you can do: 2) check the Motor Lift the Voltage DC ( direct current) is diffferent from the Motor Drive that work with 115 VAC( Voltage alternating current). See the Voltage in the plate of the ...

...drive belt continues to turn but the front roller stalls, you may have a broken front roller pulley. Step 1- Find the motor mounts. Many motors in Icon treadmills have a main pivot joint in which a ...

...to motor, capacitor, or choke. 2. Loose brush holder screw on motor. (Check Both) 3. Failed drive motor. Part # 70014 (110V), 70125 (220V) NO YES NO YES 5.1 5.2 5.3 5.4 5.5 NO 1. Check wiring ...

...Use it. and when the problem come up. Turn off the treadmill, open the motor hood, Touch the drive motor, if the drive motor is supper hot. The drive motor is shorted. The burning smell is

...off, and the treadmill works temporary, but after a few minutes will turn itself off The motor drive circuit or the motor is faulty. Also you have to check the carbon brush of the Motor . If you ...