Questions & Answers for: drive belt tensioner pulley 2006

Question about 2006 3 Series

1 Answer

...how often do I need to replace the alternator belt on my BMW 2006 325i, american model?every 50,000 miles? thank you you should replace the belt every 50,000 miles or every 5 years which ever is ...

Ad

...belt is routed. The tensioner is normally indicated on this diagram. I think on your car, the tensioner pulley has a hex bolt on it, which can be loosened, to move the pulley. The tensioner pulley ...

Ad

Question about 2003 325

1 Answer

...pls i made this with paint. hope it helps. typically on a bmw the belt goes between the water pump and crank pulley to the tensioner; if this is a 99 to 06 ish 3 series and some 5 s you will be ...

...hole in the front of the tensioner. The belt tensioner is automatic so no tightening is necessary. Best of luck! Greg M44 M50 Can anyone tell me what size socket I will need for the pulley

drive belt keeps falling off the crankshaft pulley. Fitting a new belt could not help. What could be the cause and possible remedy for this.? if air con belt runs off the pulley inspect the crankshaft

Question about 2005 X5

1 Answer

...belt that drives the alternator, or the one that drives the air conditioner compressor, correct? This can be caused by a missing bushing or a loose bolt on the alternator or compressor or power ...

...ground off also the tensioner can be operated with a 3/8 drive ratchet. Apply tension to this pulley after getting the belt wrapped around the other pulleys and then fit it over the Alt. pulley

Question about 2006 325i

1 Answer

...have the belt off see if you turn the pump pulley by hand . As the belt will drive the alternator (battery light) also It points to the belt and the only real load is the pump when you turn the ...

...belt will take him over 5 hours. Is this even remotely true because he's charging $80 and hour and I feel like he's really stretching the time he's actually going to be working on it. I have checked ...

...drive belt still fitted? If so draw a diagram of all the pulleys connect the pulleys in your piccy with lines as per your belt run on the engine.There may be an automatic tensioner you will require a ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...