Questions & Answers for: dp26746 power

TV Just shut off We were watching TV and it just shut off and it won't come back on. Reset button does nothing. There is powere to TV and antenna. This may be a power supply failure. The set would ...

Doesn't power on_Blown fuse (F601) T4AH250V Replaced fuse and TV still doesn't powers on and anything. Checked power board (1AA4B10N1630A) for shorts i.e. {open resistors or shorted diodes or ...

Press power, it clicks but nothing then clicks again as it turned off. the tv does not turn on when you press the power button but it clicks as if its going to work then it clicks again as if it ...

Screen turns to vertical stripes after the set is on for a while or sometimes when turned on. Turning off the cable and tv power multiple times seems to bring the picture back. The set is less than 3 ...

tv clicks doesnt come on These sets are good with Power supply problems

will not get power By "will not get power" I'm assuming after its plugged in and in one peice, the power button is unresponsive? If that is the case sounds like a classic powersupply outtage. If you ...

Sanyou DP26746 LCD TV Has sound, No picture, Has backlights, LCD is active Powers up. Has sound. No picture. Caps all test good. Diodes all test good. No visible pcb burns.LCD active to touch. ICs ...

...dp26746 wont start, all the voltages in the power supply are present, so can somebody gimme an answer to this problem? thanks . leave my email [email protected] Check and replace its main digital ...

Why doesn't it stay on? I have unplugged and replugged, held down the power button for a min. had same problem before, so I was leaving tv on with all brightness, etc, settings turned down. but when ...

...power cycle and then flip through channels to see if the issue remains. If so, you might need to set a tv diagnostic-appointment with a company like geeksquad/ home depot after attempting a factory ...