Questions & Answers for: double pole throw switch wiring

Question about 1996 Eclipse

Power windows problem

...double pole that has two separate sets of contacts isolated from each other - DPDT. If you want to see the electrical symbol for these; http://en.wikipedia.org/wiki/Switch Go down to the description ...

Question about JGR8850 Gas Kitchen Range

2 Answers

Fan/stove light switch broke needs replacing

double pole double throw rocker switch from Galco part 54-052-NTE. It is a much bigger switch, but I just hogged out the metal in the cover with a dremel and a bit that looks like a milling bit. After

Question about JGR8850 Gas Kitchen Range

1 Answer

I have a 4 pole mcgill toggle switch that the

double pole double throw switches but nothing like you claim - and Im not saying yhou dont have such a thing. Can you tell me more about what this switch does ... I can tell you more about how to wire

Question about T104M 208-277Volt 40-amp Timer Switch-Double Pole / Single Throw

1 Answer

Installed t 104m timer wire for wire with old one

installed t 104m timer wire for wire with old one ,still doesnt work. there is power to timer make sure that you do not have line and load crossed. The line is the power coming into the unit

Question about T104M 208-277Volt 40-amp Timer Switch-Double Pole / Single Throw

1 Answer

I have a 230 volt

double pole, double throw. That is two terminals on top to connect the two supply wires and two terminals on bottom (that are both open when the switch is OFF and closed when the switch is ON) connect

Question about T104M 208-277Volt 40-amp Timer Switch-Double Pole / Single Throw

1 Answer

Replacing a triple single pole (1980's) with a

...pole double throw switch that is used as a three way. The short answer is NO that replacement will not work UNLESS you don't want the other switch on the other side of the room to work. Personally, I ...

Question about 2006 Eiger Automatic 400 4X4 Camouflage

1 Answer

Warn winch 2006 Suzuki Eiger Winch will retract

...all clean on the control input terminals at the contactor.(The contactor is the device that changes the polarity of 12V to the winch to extend or retract-essentially a double throw double pole

Question about 2006 Eiger Automatic 400 4X4 Camouflage

1 Answer

Is this considered a single throw switch or a tripple throw switch and what's the difference

...double pole switch is 240 volt double breaker... flip the breaker and two wires turn on-off. Example triple pole switch is any 3 phase contactor or 3 phase timer ... flip the switch and three wires ...

Question about 2006 Eiger Automatic 400 4X4 Camouflage

2 Answers

Why does some automotive toggle switches have just two prong for power and some have three for power and ground. Is the ground necessary when what you're wiring is already grounded?

pole, double-throw switch. That is, it controls two circuits but only one can be on at a time. For instance, it could control a two-speed fan with one position being low and the other being high. The

Question about 2006 Eiger Automatic 400 4X4 Camouflage

3 Answers

I have a 6365 Milwaukee circular saw.bought switch original was discontinued after I wired it it pops breaker.

...double pole switch. It seems like you have wired Active to Neutral at the switch to cause an immediate power trip. You can buy new saw. I decided to build some small house fro wood and need fo it new ...