Questions & Answers for: door mirrors inop

...The drivers side works fine using the same controler. The fuses are fine Remove door panel and check if mirror is plugged in. Wiggle connection and recheck operation. If still inop, replace

...door functions, (windows, mirrors, rear vents, etc.) work, as does the other functions on the remote. there is an update for the bcm on 2005 caravans for this problem...you need to see your local ...

...mirrors will not work, power lock switch on passenger door locks all except drivers door, drivers door power lock switch does nothing, key fob locks and unlocks all except drivers door. I cannot find ...

...problem? Any Ideas .CM If your power mirrors w not fold and the keyless entry is inop, it is the passenger door power controle module. ( the assy. with all the switches on it on the passenger

...door electric locks, window and mirror wont work, also keyless entey is inop {: ) If the PDM fuse at the IP fuseblock is found okay, try to reprogram the passenger door/window switch, before ...

2000 Jetta nothing works in the driver door window master switch and power mirrors inop from drivers door. look for a broken wire inside  the boot between the door and body

...mirrors inoperative where is the fuse and if fuse is ok where is the motor located well to answer that question make appsolutly sure it's that and not your switch, things can get very wallet ...

...mirrors are very complex... not just glass and plastic. heaters ,motors, memory , etc. the FSM cover all tests for the mirror, including scan data. ill quote the FSM now , 8 steps (just 1 fail,not ...

...door mirror will not adjust Wing mirrors have a certain range of electrical adjustment. Manual adjustment by pushing with fingers can make electrical adjustment inoperative. The solution is to make ...

...mirrors fuses are good. Scan tool not detecting power window control module. Also not detecting mirror control module. Signals from switches are recognizeable like requires wiring harness or control ...