Questions & Answers for: dodge ram 1500 auto start

...Dodge Ram 1500 - Cranks fine, idles good, but when you accelerate down the road it will bog down let off gas petal it idles back. try to pass or get on the freeway and no power acts like its running ...

ram 1500 with 360. It only has 47,000 miles, but on the way home the other day, it began to shake badly as if a wheel were loose. I looked and the check engine light had came on. The truck will start,

dodge ram 1500.. after replacing the fuel pump my truck started with no issues... i then took my truck and ran to a few places shutting the truck off at each destination.. when i got home i decided to

...dodge ram 1500 with the 5.7 liter. My engine light had come on and I brought it to Auto Zone to see what the problem was. The test brought up the #2 senser on bank one on my exhaust. I changed it out ...

...dodge ram 1500 4x4 wont start. it will turn over but will not crank. we have replaced the coil and the crank sensor and it will still not work. Is also not the timing belt or the fuel pump. any ideas ...

...Dodge Ram 1500 vibration while driving only felt from drivers seat Recently my 96 dodge ram 1500 started a weird vibration while driving at several speeds. I have found that slowing down a bit, ...

...Dodge Ram 1500. Cranks and runs fine but after it warms up it dies. After cooling off its as if nothing is wrong til it warms up again then dies and wont crank. Talked with one person that said a ...

...Dodge Ram 1500. How to make the horn stop going off constantly. Connect the battery, Honk Honk Honk!!!! Tried to crank it but it wont start but it tries. If the batteries connected the horn is always ...

...Dodge Ram 1500 5.7l Starting problem Im in need of your services but not sure if its for the tipm or the computer. Ill explain what the trucks doing and how it started. I hit the remote start one day ...

...Dodge Ram 1500 5.L SS/T 4x4 Sport No power to OBD2 Connector Check Engine light came on after jump starting truck last night (driver error - battery cable not re-connected securely after checking PDC ...