Questions & Answers for: dodge caravan wiper problems

Dodge Caravan wipers will not stop i must unplug the harness to stop them you could either have a welded contact at the wiper relay or the shorted wiper switch. after you unplug the harness, check the

...Dodge Grand caravan, the rear wiper stoped working, I checked all electrical and but no problem. I think it's the motor. How to replace it. Remove the wiper arm. Lift the hatch up. Remove all related ...

...dodge caravan se 6cyl 3.3 windshield wipers will not turn off, head lights will not come on, turning signals will not come on. the hazard lights work. we have replaced wiper switch,headlight relay, ...

...Dodge Grand Caravan wipers continue to run after ignition is turned off. The only way to stop them is to disconnect the battery or unplug the wiper motor. The switch will turn on the wipers (after ...

dodge caravan 1996 During cold weather wiper malfunction dodge caravan 1996 During cold weather minus 5 degrees Centigrade the wiper arm does not return to its original state of rest when switch off ...

...dodge caravan. When you turn on the wipers, it keeps running and never shut off. Eventhough the wipers switch is working on slow and fast speed but when you turn the switch to off position, it keeps ...

problem?my back wiper on my 2003 grand caravan no longer works how can I fix it.I checked the fuse seems fine. I had the same problem with my 2001 grand caravan and had to replace the rear wiper motor

Wipers windshield not stop dodge caravan 96 sounds like the switch that controls wipers is going out. had the same problem and replaced switch and fixed the problem. Hope this helps

...dodge caravan my battery was dead and after replacing it my panel lights are blinking window wiper and washer bottoms below radio Same problem with my 98 grand caravan! Turn heater on high with air ...

...dodge caravan 2004 i had problem with the reverse lights and after getting the bcm changed , the reverse light works but the wipers and indicators and double flash doesnt work You need a scanner to ...