DND cancel code. It can be used form single line phones within the system as well. my display is nearly unreadable. It has blue bars over the display. Press Feature then hit 69 then hit Feature again.
DND but i dont have the code to turn it off... i just need the feature code for this with handset down press speaker and then #8 I have the dterm series i, and I turned off the DND by pressing feature
Question about Dterm DTP 16D-1 Corded Phone
...DND option code.0 = Cancel DND1 = Incoming trunk calls blocked2 = Paging, incoming Intercom, Call Forwards and transferred trunk calls blocked3 = All calls blocked4 = Call Forwards blockede.g. ...
...turn on/off DND or program one of the 20 buttons to be the DND? You would have to have know the type of telephone system. go into prog 39 and put code 498 on that port(000*015) [email protected] ...
Question about DSX Systems NEC-780020 DTR-1-1 BLACK Single Line Phon Phone
DND option code.0 = Cancel DND1 = Incoming trunk calls blocked2 = Paging, incoming Intercom, Call Forwards and transferred trunk calls blocked3 = All calls blocked4 = Call Forwards blockede.g. (if you
Question about DSX Systems NEC-780020 DTR-1-1 BLACK Single Line Phon Phone
code to deactivate the DND service and then sms the code as per the customer care officer instruction. Or in some case the MSP may take the request through calling itself, just confirm with him. Thank
Question about DSX Systems NEC-780020 DTR-1-1 BLACK Single Line Phon Phone
...key in this code: 129 -enable DND 130-disable DND please see your phone documentation on how to enter these codes, these entry procedure varies from model by ...
When i press the program button and FWD/DND buttons nothing happens You have to set the button up first. You can press the FWD button (or press INTERCOM and dial *710) then x (500 or 165 for your ...
...Do not receive you code then you might be On DND. to get code you will have to UNSUBSCRIBE from DND service for this u can call on 1909 and register your request. after that only u can get your
Question about KX-T7630 Corded Phone
...your pushing is just a speeddial button with the DND code, which somehow has been erased. Don't know which of the 12 or more NEC systems u have, but someone should have the user guide to
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions