Broken / Cracked display I dropped my Rhino 120 and cracked the display, the unit functions fine but I cannot see through the crack very well, kinda like looking through a cracked windshield. Can I ...
Question about iQue 3600 GPS Receiver
no voice, no map display beyond 30 mile range, slow to compute Over time Garmin my iQue3600 has developed the following problems: 1. Voice directions no longer works, 2. Map display for more than 30 ...
display on etrex Legend is dim I have two, identical, etrex Legends. The display on one has become very dim, almost faded looking, making it very difficult to read. The display on the other etrex is ...
Question about Nuvi 360 Bilingual GPS Navigator and Personal Travel Assistant GPS Receiver
I dropped my Nuvi 360 GPS and the screen now displays horizontal colared lines and the graphics will not appear. From technical experience, this indicates a broken display or display ribbon cable ...
Garmin Forerunner 50 Train Display Settings The Train mode always displays two views. I can´t remember how to change them. I could do it before but not anymore. The owner´s manual does not say ...
light/white screen display my garmin nuvi 350 displays with a very light/white screen. It happenned after using it for a couple of years while driving. It still gives voice instructions but it is very
...I learned many years ago - it was a process performed periodically on early CRT (cathode ray tube) displays (such as a TV). Over time, CRT displays would build up magnetic charges that would cause ...
backlight burned out, how do I replace it? The back light is typically an integral part of the LCD display, so you may have to replace the entire display. On some displays, the touchscreen and back ...
the display is dim and hard to see. cannot see display bright on the unit First, make sure that your brightness is turned up. You can access this from the menu by selecting "Display" then adjusting ...
How do I fix the backlight of my garmin 3205 The unit powers on and works but the display is very dimmed and does not get bright even after raising the brightness all the way. The unit is no longer ...
Usually answered in minutes!