Questions & Answers for: Toshiba disk mode

...mode" etc. and when I choose one it doesn't do nothing, I mean it just keep in the same screen, if I turned off and on again I just got the same screen, I don't know how fix it, can you help Thanks ...

disk. Usually you can solve the problem going to BIOS settings and changing SATA/RAID settings.Check your BIOS settings, and disable SATA RAID mode.This is done in different ways depending on the BIOS

...if you use a USB floppy drive) Alternatively, check your BIOS settings to see if the disk controller can be set to operate in ATA mode rather than AHCI mode. ATA mode should work with the XP

...disk space used. You can only format these drives in mode FAT16 or FAT32. Try to format it in FAT32 mode and let Windows choose the default sectors for you. This is the better solution. As I can see, ...

...mode your disk is in: 0 = High, 1 = Maximum. In High security mode, you can unlock the disk with either theuser or master password, using the "SECURITY UNLOCK DEVICE" ATAcommand. There is an attempt ...

enter in normal mode then you need windows disk or recovery disk. Then boot your computer with that disk and repair previous windows. Let me know if you need further assistance. Thanks for using FixYa

mode your disk is in: 0 = High, 1 = Maximum. In High security mode, you can unlock the disk with either the user or master password, using the "SECURITY UNLOCK DEVICE" ATA command. There is an attempt

...to bios and change the bus mode for the hard disk ..save changes and reinstall operation system if needed..or go on from where it was..It will see the hard disk and no longer give you the blue ...

mode it only means that one of the installed software is preventing windows to load. 5. if still cant boot you neet to reformat the system. You can use a Recovery Disk that came with the system or you

...mode&clicks2black screen that says."multi disk disk partition Windows system32drivers."&goes back in safe mode. In safe mode, which driver does it fail to load? Is the boot order correct? What is the ...