Questions & Answers for: dishwasher wont work unless push

wont start When I push the start button, the washing light starts to flash, but the dishwashing cycle won't start. The lights flash when the door is not shut all the way, or the sensor that detects ...

unless I push the door Thgis morning the DW stopped runing half-way thru and now it won't go on unless I lean against the door. Any ideas? Probably a broken latch assembly.. UNPLUG UNIT!! Remove inner

...dishwasher wont open the door to let the soap out there is a solenoid inside the door at the back of the dispenser.occasionally the electrical connection to this comes loose and simply needs pushing ...

...wont start I cannot get it to stop blinking and i can't get the dishwasher to start. Hello, Hopefully you have resolved your issue. I have not heard of the cancel light flashing issue. I have had ...

isn't "Connecting" Unless it is close enough, IE: The door pushed in so that the sensor & activator are close enough to work., .The sensor has to be adjusted, or replaced if that's at all possible

...dishwasher and lately it does not work unless I keep pushing the door closed.Then it starts and when I leave the door it stops without finishing the whole cycle. What can i do to fix this? Thanks It ...

...wont start when start/cancel button is pushed Some fault in the dishwasher is causing it to believe the door is not locked. I would check the door lock. check this youtube video out for the location ...

...dishwasher won't start running unless I push the door closed extra tight. As soon as I let go it stops running. I have ensured nothing is sticking out stopping the door from being properly shut ...

dishwasher will not start unless I push the door in further The door closes and seems to latch, but unless I push it in on the top right corner harder, it will not start. When I let go, or take the ...

dishwasher cycle was interrupted by opening door, whent the door was closed to restart, the sgtart bottom wsas pushed but now it wont work turn off breaker to it leave one minute and turn back on also