Questions & Answers for: dish tv keeps rebooting

Dish ViP622 keeps crashing - on 6th unit from Dish network Our Dish ViP622 unit keeps crashing and we have to replace every other month. We have tried pluggin into power strip, wall, different plugs, ...

...keeps rebooting. No help from dish network. Hi, I suspect that there is either a problem with the LNB or the cable. Make sure you have not accidentally got a strand of the braid touching the inner ...

...TV. Dish Network should be avoided at all costs. dish does have problems and charge too much. But I think you're being biased. With one twitch of one of my finger my antenna input came off from the ...

dish and they said to pull the plug on the 622, shutoff tv, pull video cables and then to pull the card. The reciever sat for 2-3 hours before powering up and now there is no lights on the front panel

...keeps losing the signal on every channel except terrestial 1, 2 3, 4 and 5. An error message comes up with 'no satellite signal being received' and codes 28 and 49 and to get the signal back, we have ...

A/v rec and connect your 622 direct to your tv and see if the problem persists, it it does, then your DVR needs to be replaced, you can call dish for addition troubleshooting if it is in fact your DVR

TV input I am connect to the dish by HDMI 1 but it keeps reverting to the TV input. Happen when I connect to the other HDMI imputs also. Why? I assume you are connecting a Dish Network receiver (model

...keeps getting corrupted. Lose everything. What should I do? Hello, this is Nick Franta with DISH Network Customer Support. To correct this issue we can reset your receiver. Unplug the receiver for 10 ...

tv and the DISH. All is fine! EXCEPT!!!! After anywhere from a half hour to 4 hours later the remote will not let you change channels. The only thing that works is the Volume and you can turn it off..

...TV. also on Dish if it is left unattended (like stay on same channel etc) it will go in to sleep mode, U then just hit the Select button.. U can go in the Dish menu and set the Sleep mode (inactivate ...