...dish network n get replacement receiver The Dish 301 is about as basic as it gets, it's one step above hand shadows for entertainment. Might try power up with card inserted if that doesn't help send ...
could be the causes of this? The receiver sounds as if it has a power supply issue and is power cycling. The receiver must be replaced. Thanks for using Fix Ya and being a valued Dish Network customer
...take 45 minutes to 4 hours. The other could be connectionsfrom the back of the receiver to the wall need to be hand tight and unplugthe receiver for 10 seconds to reset. Mike Houston of DISH ...
Question about DVR-625 DTV Receiver / 100-Hours Video Recorder
...dish dvr. Guest, The 625 receiver does not have a setting to control closed caption. This is a setting from your TV itself. I would look at your TV manual to see how you can turn the feature on. I ...
...Dish Network customer service here!! I am sorry for your DVR issue! To get that resolved, if it has not been already, try to unplug the receiver from the power source for 10 seconds. If thsi does not ...
Question about ViP722 DTV Receiver / 350-Hours Video Recorder
...Tries unplug,replug the DVR box an hour later.The box should reset itself and update it software.The box should work normal again.Not,call Dish Network to replaced the box,have intermittent
Question about ViP622 DVR DTV Receiver / 180-Hours Video Recorder
...Dish Network customer service here. if your 622 is overheating you should get an errpr message stating its overheated. At that point you will need a replacement, if its turning off and on by itself ...
...Dish network remote for the upstairs tv (LG) - which has NO box. Is there anyway to program my TV remote, so I can access the TV staions - turn on the network basically??????? No,the Dish Network ...
...dish network and when I turned on the TV the screen is black and shows hdmi2. How do I fix it? Michele, I would be happy to help with that. It sounds like the receiver may have been switched off the ...
Question about DVR-625 DTV Receiver / 100-Hours Video Recorder
Dish Network and set up a Technician visit. There are a plethora of issues that could be causing your signal loss, including but not limited to: Corroded Fitting, Loose Connection, Obstruction in Line
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions