Questions & Answers for: disconnect alarm ford focus

...alarm stays on even with belt fastened.can I disconnect or repair myself You can disconnect it yourself. There is a wire lead that comes from the seatbelt fastener, you may need to lift the carpet up ...

...or pwer supply, must be direct of the battery, disconnect either.You said the alarm is replaced in the boot, than the power wire to the alarm is located their.Disconnect it, tape off the end and

disconnect the alarm cable/socket connected to the lock assembly. 5. Try pull open the bonnet, it may require little force to pull the bonnet open due to a little white plastic link (~1" long, plus (+

...ford bantam 1.3.now it doesnt want to start or switch the fuel pump on,what can the problem be .is it posible to override the immobiliser because i think that is the problem.all the fuses is 100%+the ...

...a try but dont hold your breth as it may well not work,,,if you disconnect the battery you will need the radio coad to get the radio working again,,,and you may need to reprogram the car

disconnect the battery for the car or for the remotes you will have to reset the system,i am sorry, but thankfully we dont have the same alarm system in the U.K. so you will,have to check your manual.

...off the battery a few times to reset the alarm, imobilizer, the alarm will sound and this must be done every time you disconnect the battery. this is a security item. this will work thank you. ...

...In any case, make sure to check that your hood is closed securely with the hood open switch

alarm/immobiliser LED and is there a sequence to the flashing like 5 flashes then a pause? Check if led flashes a code, look for sequential flashing. try turning on the key and lights after disconnect

...tried unlocking car door with key and the alarm goes off and couldn't get it to stop,had to disconnect battery. What should I try next? Re connect the battery, turn the alarm off with your key