...tv all channels work except 2 thru 7. i have cable television. the cable goes directly to the tv. NO CABLE BOX NO VCR NOTHING BUT THE CABLE WIRE TO THE BACK OF TV ALL OTHER CHANNELS WORK FINE bad ...
...channel 3. Tried another TV and everthing works fine, so I am pretty sure that the cable box is fine. Routed the cable directly from the wall to the TV, bypassing the cable box, and ran the ...
...direct tv remote will not change channels. this just started. Nothig was changed. after this, i did change the direct tv box and it still would not change channels with the tv on. I can disconnet all ...
...direct tv. Hooked everything up o.k. Pressed menu and auto scanned channels. It kept repeating auto scan. Then I got a no signal sign. My husband is using a splitter from my other tv in the living ...
...direct tv then to select channel of the direct tv box. The box is broadcasting to the tv on ch 4. Also check that tv is on correct input . Again use the Panasonic remote to select correct input. If ...
Question about TC-32LX60 32 in. LCD Television
...direct tv but cant get a picture i have it on catv ran it threw the channel set up but the catv goes from channel 15 to 125 but no channel number 3 i can input channel 3 in the manual mode but it ...
...TV to get to channel 4 thinking that might work as a dvd station, but it jumps directly to channel 7. Do you have any suggestions? I'm sure it's wired correctly since he had it working when he left, ...
...Direct TV and it worked fine without a separate box. Is it different with cablevision? Yes, with the Direct TV box it did all the tuning and your TV had only to be on one channel, normally ch 3 or ch ...
work. Unfortunately the tv goes directly to Channel 79 everytime we turn it on and you have to manually change the channel to channel 3. I deleted all the channels and auto programmed it. But it still
Question about 40RV525R 40 in. HDTV
direct tv satellite to change the channels help find a code to work my direct satellite receiver to change channels from my Toshiba remote control? try working it the other way, input the code to work
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions