Questions & Answers for: dimming halogen bulbs

...halogen bulbs. Is it possible just to replace the halogens with extreme brilliance or Osram Nightbreaker bulbs, or would something else need to be replaced to (e.g. upgrade the fuse)? Sorry - don't ...

Ad

Question about HOME PRODUCTS AR180 "PLUG IN SLIDE" INCANDESCENT/HALOGEN DIMMERS

1 Answer

apparent fixture problem for halogen plug For recessed halogen fixture. Tried replacing blub but verified blub itself is fine. Blub has 2 prongs that plug into base attached to 2 wires. Should I try ...

Ad

...bulbs can be lots of different types, xenon, halogen, but never LED. Sidelights are a lot less brighter, they can be simple argon bulbs to LEDs, or even Cold Cathode You can view a manual at part ...

My 1988 Thunderbird speedometer digital read out too dim My 1988 Thunderbird speedometer digital read out seems to be too dim, in the daytime. Is there anyway to make it brighter? I couldn't find ...

Question about 600-Watt Incandescent Dimmer Switch by Electronics, Inc

1 Answer

halogen bulbs. What did I do wrong. Got a hot wire coming into the box, and the halogen branch coming in also. Thank you for your time. this is a common problem with many dimmers, there is no good fix

Question about 600W ECO DIMMER

1 Answer

dimming. The buzzing usually gets worse at around the 1/2 light level point. I don't think the issue has to do with whether the lamp is halogen, but rather how the lamp is physically constructed - and

Question about 600-Watt Multi-location Dimmer Switch by Electronics, Inc

2 Answers

...bulbs? They generally can't be dimmed. The Dimmer & the Lamp MUST MATCH. If your Dimmer was intended to operate with INCANDESCENT (original Light BULB, not CFL), it will ONLY work correctly with ...

Question about Lutron Dimmer 600 Watts Ma-600-wh

1 Answer

...halogen bulbs," are you referring to MR-16 (12-Volt) lamps off a transformer, or line-voltage halogen lamps. If using the MR-16s, then the fixture doesn't qualify as "incandescent" which is what the ...

Humming halogens. I recently installed an electronic low voltage dimmer, 300watt DIVA, to my Kablelight system. I have 4 MR16- 12V- 50 watt bulbs. (200 watts total). When dimmed, the lights hum loudly

Newly installed Minka aire concept II ceiling fan is poorly lit. Installed in my son's bedroom and it's useless, dim. I just installed a Minka aire concept II ceiling fan in my sons bedroom and it is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...