Questions & Answers for: NEC MultiSync dim image

Question about MultiSync LCD1715 17" Flat Panel LCD Monitor

1 Answer

...dim display. If you ever have one that has no display but the power light is on you can check by shining a flashlight directly into the LCD from the front (right into the screen) if you can see an ...

Ad

Question about MultiSync XV17 17" CRT Monitor

1 Answer

Display Image Pinched Vertically Apparently, when the display image suddenly becomes pinched verically at left & right sides, the monitor is likely suffering from a faulty pincushion correction ...

Ad

Question about MultiSync LCD4010 40 in. Television

1 Answer

NEC LCD4010 no image Powers up, can just see back light is on but no image. Have several LCD4010 in my company & if one fails is always same symptoms. All screens fed from same source so not an input ...

Question about MultiSync LCD1935NXM 19 inch LCD Monitor

2 Answers

...dim image or black screen or flicking image on the LCD screen it means you have a backlight problem. Dim image and/or dark display on the LCD screen indicates a faulty LCD backlight and it could be ...

Question about MultiSync LCD1720M (Black) 17 in. Flat Panel LCD Monitor

1 Answer

...dim image when you view the screen at a sharp angle? If so you have a backlight problem, the fault could be a faulty inverter that supplies high voltage to the CCFL lamp or the CCFL lamp could be ...

Question about MultiSync 95 19 in.CRT Conventional Monitor

2 Answers

19 in. Multisync 95: screen image keeps shifting 19 in. Multisync 95: the whole screen image keeps shifting - getting larger and smaller by just a few pixels. Occasionally, the whole image quivers. On

Question about MultiSync 1760NX 17" LCD Monitor

1 Answer

multisync lcd1760nx This monitor powers up and works fine as far as I can tell. I set my notebook screen to show on this monitor as a clone screen(same image as my notebook screen). I cant see the ...

Question about MultiSync LCD1765 17" Flat Panel LCD Monitor

1 Answer

An 'etch-a-sketch' - type image that at quick glance, looks like an elephant, appears in the upper right section of the screen. It isn't captured with print screen. Swapped out monitors to different ...

Question about MultiSync M700 (White) 17 in.CRT Conventional Monitor

1 Answer

HI, my monitor nec multisync_m700 17 inches turns off after some seconds After the Image is shown, (may be it reaches to show the boot and start of Windows) instantly rapidly the image decreases the ...

Question about MultiSync LCD1860NX 18.1" LCD Monitor

1 Answer

I have a dim screen! All of the sudden, screen is dim. i bought this sec hand so I dont have the manual, but did try fixing thru the settings with no change. Probably a bad power supply or an ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...