Questions & Answers for: dhcp setting ip phone

...IP address on the DHCP server, lease times are set for 3 months on that subnet, , a manual reboot has to be performed before the phones come back on-line. It doesn't happen everyday but occasionally. ...

...DHCP, xxx seconds until reboot" simply means that the computer isn't getting an IP address from your router. Setting up your router is another entirely separate topic. This is pretty simple though, ...

...feature and set static IP address, the phone worked normally. While the other phone, can contact the DHCP server and get IP address. Check on the router if you are distributing enough IP

...3000 when i boot ip phones they show dhcp server missing option 125 and 128 error My guess is that your DHCP server isn't set up properly, or someone has connected another Router to your

ip phone 4606 goes on DHCP i am not able to reset Unplug the phone and when it is booting, you will see DHCP Press * to program If you miss it, and the phone comes up....press MUTE 2337# that will ...

...a Mitel 5215 phone to our network. it hangs on "DHCP DISCOVERY - USING OPTION 128" The network switch isn't set up properly.Contact your vendor or network admin for setting this up

..."static" ip addresses, if thats the case you will need to surf into the phones web console and set a static IP address. Or the opposite, enable DHCP in the belkin. hope that clarifies things a

...Dhcp Depends on your network setting, check if your network has Fixed IP or DHCP, if you have DHCP check the Setup menu when he phone starts up, go to network settings and make sure its set for DHCP, ...

...to make sure your IP PBX or another server is housing the configuration files and the tftp program or daemon is running, then have them add the tftp server setting to the DHCP scope for your

...SETTING" then it goes back to "DHCP: Offer Rej" I also read that if you press both the up and down buttons while rebooting, the device will reset to factory. However, all this seems to do on my phone ...