Questions & Answers for: dewalt d51822 nailer problems

dewalt 51844 round head nailer when i pull the trigger air leaks around the trigger area. Just got it out of the shop but still doing the same thing. Could be a couple things, the seal ring on top of ...

Dewalt D51822 fires once only I put a gasket kit in this well used nailer. The nailer will fire the first time but the piston driver stays in the down position and does not retract. If I retract it ...

Nailer - D51822 - dissasembly problem Head Framing Nailer - D51822" How do i get the cylinder collar of so i can change o-rings under the BULKHEAD ? You have to remove the cylinder. To do this use two

D51822 framing nailer - worked just fine for a couple of hours then refused to fire nails. Pulling the trigger now results in a small puff of air. Current air pressure is set at 100 PSI. I have not ...

Dewalt D51822 nail gun does not fire nail. When trigger is pulled air can be felt coming from the trigger area. I have replaced the trigger valve assembly and it had no effect. Gun is about 3 years ...

d51822. i have been using it all day with no problems. went in for lunch, came back 15 minutes later and air was leaking. Only shoots nails half way now. Sounds like the piston seal is bad you can see

...d51822 framing nailer that will shoot a nail but then not recoil to shoot the next nail, if you wait 10-20 seconds the gun will release air at the top of the gun and recoil Most likely there is a ...

...dewalt clipped head framing nailer nail broken &hung between driver and frame there is NO easy solution for this, but unplug air and get a pair of safety glasses and a punch and try and knock the ...

21 degree round head framing gun wont do nothing when air hooked up dropped from roof couple times and now wont fire when hooked up If it hit the slab it may be toast. Out of round cylinder body or ...

Dewalt D51822 framing nailer shoots automatically when hooked to air without bumping and pulling trigger These nailers are infamous for having trigger valve problems,,,replace it and it should work,,,