Questions & Answers for: dewalt air regulator leaking

...dewalt D55152 compressor is leaking air. It will build air and shut off. I thought it was leaking from the regulator, but I replaced that, still doing the same thing. The valve that come out the the ...

regulator leaks adjusted the regulator and now it leaks take off the regulator and put thread tape on the threads and reinstall. this should stop the leak

...suction should fairly strong. If no suction or actually feels like air is blowing out of intake, suspect valve plate. Parts are available at dewalt service center or www.toolpartsdirect.com. Good ...

dewalt. It will include the manafold less fittings.. You could also try taking apart the regulator and clean rubber parts and lubricate with silicone paste lube (sold at lowes in plumbing department).

Air is releasing from nut on regulator, is this normal? no its not,,,,there should be no air leaks at all nip the nut up

...DeWalt D15155, Type 2 compressor. Regardless of setting of the regulator, the downstream gauge shows the same pressure as the tank gauge and there is constant air escaping at the regulator. ...

...dewalt compressor model55146 regulator leaks air. May not need to remove the manafold. Order regulator repair kit number (N008792) and try to repair in-place.  If the knob  is stripped, do ...

air is leaking from regulator knob on my d55146 compressor. will a regulator rebuild kit fix it or do i need a hole new regulator? Yes. A rebuild kit will include all seals and o-rings needed. This ...

...air leaks out the bottom of the handle. I believe the seal to the torque selector is bad but I do not know how to remove the selector to try and replace the seal. beneath the rubber grip there is a ...

...dewalt d55155r and air is leaking out the 2 small holes on the regulator unless the pressure is turned all the way up, I have taken apart the regulator and cleaned the parts fixed it some debris in ...