Questions & Answers for: determenation

Question about Magnavox 27MS343S 27" TV

1 Answer

42mf231d/17 fails to turn off manually or w/ remote. Unit will not turn off manually nor w/ remote. Image and sound go off, power indicator stays on and screen appears to be energized. Any suggestion ...

Ad

Question about 1996 C/K 2500

1 Answer

i have a 1996 Chevolet C/k 2500 runs great but cuts out then cranks back up i really need a solution i just got a job after 8 months and cant get to work does service engine light come on before it ...

Ad

Question about 1984 Caprice

1 Answer

CAR KNOCKING / 1984 CHEVY CAPRICE I HAVE CHECKED IT IN NEUTRAL AND IT IS STILL KNOCKING AS FOR THE OIL GUAGE ITS FINE ITS WARMING COULD IT BE THE ROCKING ARM. CONTACT ME BACK It could be a rocker arm ...

Lincoln Towncar 1999 turns over great. Has a new Lincoln Towncar 1999 turns over great. Has a new fuel possition sensor, Crank case sensor, cam shaft sensor. The fuel pump safety cut off switch is not

Have 1996 Pontiac Grand Am Gt and the brakes work but the brake pedal is all the way to the floor...how do I fix this? adjust or replace the rear or could be air in lines which would have to be traced

Question about 1996 Contour

1 Answer

i changed the spark plugs on my 1996 for contour 2.5 l v6 now it doesnt start what did i do wrong how do i determen if the wire are on the rite spot The cylinder numbers are marked on the coil pack. ...

There is a lot of white smoke coming out of my 2002 need help? Bummer. Lots of white smoke is an indication of coolant getting into the combustion chamber. Most common issue is a warped or cracked ...

coolant leaking 95 gmc yukon 4x4 5.7 350 vortec coolant leaks with in a hour. oil seems to be good.seen coolant drips on the floor could be hose are a freeze plug are water pump.determen where the ...

Question about 2004 Aerio

1 Answer

... sounds like bearing noise around belt tensioner , but due to confined space it is hard to make the determenation. Cant find repair manuals or schematic to see what else it could be before actually ...

Question about 2004 Aerio

1 Answer

Code p0700. Its running in limp mode by staying in 3rd Changed out ecu (brain) didnt change problem. If I change tcu should that fix my problem? Im going to clean the shifter points (clean grafite) ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...