...increase pressure by turning screw in,only has 1 lb pressure so shuts off throw it away, i have 6 desa heaters that cost me more in maitenance than a new one trow it away and buy a new one Check ...
Question about Reddy Heater R115DT Kerosene Portable Forced Air Heater 115,000 BTU per Hou
...Desa International Reddy Heater R115DT Kerosene Portable Forced Air Heater comes on runs a little then shuts off. If I shut it off and it sits awhile it will come on again and shut off. The unit ...
DESA Propane Heater Valve Apart The button that pushes in to override the thermocouple and start the gas flowing on my propane heater has come apart. The spring, button and stem, small washer and ...
Question about Reddy Heater 200,000 BTU Kerosene Forced-Air Heater #R200BT
heater shuts off gives a puff of smoke it is to low on fuel
Question about Reddy Heater 200,000 BTU Kerosene Forced-Air Heater #R200BT
...heater model number RH200T and it will not lite is there a way of testing the ignition to see if it is faulty before replacing it?This unit runs on multi fuels Go to this link and there are ...
Question about Kerosene Portable Forced-Air Heater
forced air heater it's a old one the best I can tell It's a 35/50 70000 BTU/HR. ware would I be able to get parts You can call Allparts Equipment and Accessories at 1-877-475-5660 they have one of the
Question about Reddy Heater R115DT Kerosene Portable Forced Air Heater 115,000 BTU per Hou
It will run but then will smoke terribly and cut off. Hi, Here are a couple of tips that I wrote that tell you how to troubleshoot a Torpedo or Reddy heater... Reddy Heater - Troubleshooting Torpedo ...
Question about Kerosene Garage Shop Heaters - All Pro PK115T Forced Air Kerosene Space Heater
...DESA international. I have a tip at http://www.fixya.com/support/r4124129-yearly_maintenance_reddy_heaters which explains this common problem, where to get the repair parts and how to do the repair. ...
Question about Reddy Heater 200,000 BTU Kerosene Forced-Air Heater #R200BT
I have a model RM200T heater I have replaced all filters, rotor assy., and nozzle assy. pressure is at 6lbs but I get flames out past the end of combustion chamber. How can I stop this problem? In the
Question about Reddy Heater 200,000 BTU Kerosene Forced-Air Heater #R200BT
Everything works fine with the cover off, but the flame is snuffed out when you put the cover back on. Straigt up this is not getting the right air to fuel ratio. Check for a filter that is ...
Usually answered in minutes!
2,517 Questions
1,056 Questions
713 Questions
416 Questions
354 Questions