Questions & Answers for: dell 922 error 1200

Dell 922 printer giving error code 1200 When I turn on my Dell 922 printer the ink carridge jumps back and forth once violently then I get an error 1200, remove obstruction, cycle power. I tried this ...

...error 1200 print carrier stall but the carrier has no obstructions and its stuck under the housing! Not quite sure what you mean but if it is stuck under the housing then that would give the error. ...

error 1200, printer carrier stall when i turn my printer on, i get this message: Print carrier stall. check printer for obstruction, then press power. (Error 1200) I also hear a loud bang, and the ...

...error 1200 message. There's no apparant obstruction in the carriage. May be you have missed something? May be something is blocking the carriage from moving freely? clean the metal bar thing that the ...

Dell 922 print carrier stall. Dell 922 print carrier stall error message. Also, error 1200. Hi hope it will work Error code: 1200 This error code is commonly associated with the Dell 922 printer. ...

...Dell 922 printer. Usually you might see the cartridge moving front and back and slamming itself against the printer. You need to tighten the strings located on the back of the printer and then it ...

dell 922 all in one printer. Encoder strip has fallen off. Receiving error code 1200. I am not sure where the strip re-attaches. Hi Error code: 1200 This error code is commonly associated with the ...

...Dell 922 printer. Usually you might see the cartridge moving front and back and slamming itself against the printer. You need to tighten the strings located on the back of the printer and then it ...

...Dell 922 printer. Usually you might see the cartridge moving front and back and slamming itself against the printer. You need to tighten the strings located on the back of the printer and then it ...

...Dell 922 printer. Usually you might see the cartridge moving front and back and slamming itself against the printer. You need to tighten the strings located on the back of the printer and then it ...